QList Class Reference [модуль QtCore]
The QList class is a template class that provides lists. Далее...
#include <QList> Inherited by QItemSelection, QQueue, QSignalSpy, QStringList, and QTestEventList.
Замечание: все функции этого класса реентерабильны.
Открытые типы
Открытые функции
- QList ()
- QList ( const QList<T> & other )
- ~QList ()
- void append ( const T & value )
- const T & at ( int i ) const
- T & back ()
- const T & back () const
- iterator begin ()
- const_iterator begin () const
- void clear ()
- const_iterator constBegin () const
- const_iterator constEnd () const
- bool contains ( const T & value ) const
- int count ( const T & value ) const
- int count () const
- bool empty () const
- iterator end ()
- const_iterator end () const
- iterator erase ( iterator pos )
- iterator erase ( iterator begin, iterator end )
- T & first ()
- const T & first () const
- T & front ()
- const T & front () const
- int indexOf ( const T & value, int from = 0 ) const
- void insert ( int i, const T & value )
- iterator insert ( iterator before, const T & value )
- bool isEmpty () const
- T & last ()
- const T & last () const
- int lastIndexOf ( const T & value, int from = -1 ) const
- QList<T> mid ( int pos, int length = -1 ) const
- void move ( int from, int to )
- void pop_back ()
- void pop_front ()
- void prepend ( const T & value )
- void push_back ( const T & value )
- void push_front ( const T & value )
- int removeAll ( const T & value )
- void removeAt ( int i )
- void removeFirst ()
- void removeLast ()
- void replace ( int i, const T & value )
- int size () const
- void swap ( int i, int j )
- T takeAt ( int i )
- T takeFirst ()
- T takeLast ()
- QSet<T> toSet () const
- std::list<T> toStdList () const
- QVector<T> toVector () const
- T value ( int i ) const
- T value ( int i, const T & defaultValue ) const
- bool operator!= ( const QList<T> & other ) const
- QList<T> operator+ ( const QList<T> & other ) const
- QList<T> & operator+= ( const QList<T> & other )
- QList<T> & operator+= ( const T & value )
- QList<T> & operator<< ( const QList<T> & other )
- QList<T> & operator<< ( const T & value )
- QList<T> & operator= ( const QList<T> & other )
- bool operator== ( const QList<T> & other ) const
- T & operator[] ( int i )
- const T & operator[] ( int i ) const
Статические открытые члены
- QList<T> fromSet ( const QSet<T> & set )
- QList<T> fromStdList ( const std::list<T> & list )
- QList<T> fromVector ( const QVector<T> & vector )
Связанные нечлены класса
- QDataStream & operator<< ( QDataStream & out, const QList<T> & list )
- QDataStream & operator>> ( QDataStream & in, QList<T> & list )
Подробное описание
The QList class is a template class that provides lists.
QList<T> is one of Qt's generic container classes. It stores a list of values and provides fast index-based access as well as fast insertions and removals.
QList<T>, QLinkedList<T>, and QVector<T> provide similar functionality. Here's an overview:
- For most purposes, QList is the right class to use. Its index-based API is more convenient than QLinkedList's iterator-based API, and it is usually faster than QVector because of the way it stores its items in memory. It also expands to less code in your executable.
- If you need a real linked list, with guarantees of constant time insertions in the middle of the list and iterators to items rather than indexes, use QLinkedList.
- If you want the items to occupy adjacent memory positions, use QVector.
Internally, QList<T> is represented as an array of pointers to items. (Exceptionally, if T is itself a pointer type or a basic type that is no larger than a pointer, or if T is one of Qt's shared classes, then QList<T> stores the items directly in the pointer array.) For lists under a thousand items, this representation allows for very fast insertions in the middle, in addition to instantaneous index-based access. Furthermore, operations like prepend() and append() are very fast, because QList preallocates memory at both ends of its internal array. (See Algorithmic Complexity for details.) Note, however, that for unshared list items that are larger than a pointer, each append or insert of a new item requires allocating the new item on the heap, and this per item allocation might make QVector a better choice in cases that do lots of appending or inserting, since QVector allocates memory for its items in a single heap allocation.
Here's an example of a QList that stores integers and a QList that stores QDate values:
QList<int> integerList;
QList<QDate> dateList;
Qt includes a QStringList class that inherits QList<QString> and adds a few convenience functions, such as QStringList::join() and QStringList::find(). (QString::split() creates QStringLists from strings.)
QList stores a list of items. The default constructor creates an empty list. To insert items into the list, you can use operator<<():
QList<QString> list;
list << "one" << "two" << "three";
list: ["one", "two", "three"]
QList provides these basic functions to add, move, and remove items: insert(), replace(), removeAt(), move(), and swap(). In addition, it provides the following convenience functions: append(), prepend(), removeFirst(), and removeLast().
QList uses 0-based indexes, just like C++ arrays. To access the item at a particular index position, you can use operator[](). On non-const lists, operator[]() returns a reference to the item and can be used on the left side of an assignment:
if (list[0] == "Bob")
list[0] = "Robert";
Because QList is implemented as an array of pointers, this operation is very fast (constant time). For read-only access, an alternative syntax is to use at():
for (int i = 0; i < list.size(); ++i) {
if (list.at(i) == "Jane")
cout << "Found Jane at position " << i << endl;
}
at() может работать быстрее, чем оператор [](), потому что при этом никогда не создается полной копии.
A common requirement is to remove an item from a list and do something with it. For this, QList provides takeAt(), takeFirst(), and takeLast(). Here's a loop that removes the items from a list one at a time and calls delete on them:
QList<QWidget *> list;
...
while (!list.isEmpty())
delete list.takeFirst();
Inserting and removing items at either ends of the list is very fast (constant time in most cases), because QList preallocates extra space on both sides of its internal buffer to allow for fast growth at both ends of the list.
If you want to find all occurrences of a particular value in a list, use indexOf() or lastIndexOf(). Первая функция осуществляет поиск вперед от указанной позиции, а последняя - осуществляет поиск назад. Both return the index of a matching item if they find it; otherwise, they return -1. Например:
int i = list.indexOf("Jane");
if (i != -1)
cout << "First occurrence of Jane is at position " << i << endl;
If you simply want to check whether a list contains a particular value, use contains(). If you want to find out how many times a particular value occurs in the list, use count(). If you want to replace all occurrences of a particular value with another, use replace().
QList's value type must be an assignable data type. This covers most data types that are commonly used, but the compiler won't let you, for example, store a QWidget as a value; instead, store a QWidget *. A few functions have additional requirements; for example, indexOf() and lastIndexOf() expect the value type to support operator==(). These requirements are documented on a per-function basis.
Like the other container classes, QList provides Java-style iterators (QListIterator and QMutableListIterator) and STL-style iterators (QList::const_iterator and QList::iterator). In practice, these are rarely used, because you can use indexes into the QList. QList is implemented in such a way that direct index-based access is just as fast as using iterators.
QList does not support inserting, prepending, appending or replacing with references to its own values. Doing so will cause your application to abort with an error message.
See also QListIterator, QMutableListIterator, QLinkedList, and QVector.
Описание типов-членов
typedef QList::ConstIterator
Qt-style synonym for QList::const_iterator.
typedef QList::Iterator
Qt-style synonym for QList::iterator.
typedef QList::const_pointer
Typedef for const T *. Provided for STL compatibility.
typedef QList::const_reference
Typedef for const T &. Provided for STL compatibility.
typedef QList::difference_type
Typedef for ptrdiff_t. Provided for STL compatibility.
typedef QList::pointer
Typedef for T *. Provided for STL compatibility.
typedef QList::reference
Typedef for T &. Provided for STL compatibility.
typedef QList::size_type
Typedef for int. Provided for STL compatibility.
typedef QList::value_type
Typedef for T. Provided for STL compatibility.
Описание функций-членов
QList::QList ()
Constructs an empty list.
QList::QList ( const QList<T> & other )
Создаёт копию other.
This operation takes constant time, because QList is implicitly shared. This makes returning a QList from a function very fast. Если экземпляр с разделением данных изменяется, то он будет скопирован (copy-on-write), и это потребует линейного времени.
Смотрите также operator=().
QList::~QList ()
Destroys the list. References to the values in the list and all iterators of this list become invalid.
void QList::append ( const T & value )
Inserts value at the end of the list.
Пример:
QList<QString> list;
list.append("one");
list.append("two");
list.append("three");
list: ["one", "two", "three"]
This is the same as list.insert(size(), value).
This operation is typically very fast (constant time), because QList preallocates extra space on both sides of its internal buffer to allow for fast growth at both ends of the list.
See also operator<<(), prepend(), and insert().
const T & QList::at ( int i ) const
Returns the item at index position i in the list.
i must be a valid index position in the list (i.e., 0 <= i < size()).
This function is very fast (constant time).
See also value() and operator[]().
T & QList::back ()
Эта функция обеспечивает совместимость с STL. It is equivalent to last().
const T & QList::back () const
Это перегруженная функция, предоставленная для удобства.
Returns an STL-style iterator pointing to the first item in the list.
See also constBegin() and end().
Это перегруженная функция, предоставленная для удобства.
void QList::clear ()
Removes all items from the list.
See also removeAll().
Returns a const STL-style iterator pointing to the first item in the list.
See also begin() and constEnd().
Returns a const STL-style iterator pointing to the imaginary item after the last item in the list.
See also constBegin() and end().
bool QList::contains ( const T & value ) const
Returns true if the list contains an occurrence of value; otherwise returns false.
This function requires the value type to have an implementation of operator==().
Смотрите также indexOf() и count().
int QList::count ( const T & value ) const
Returns the number of occurrences of value in the list.
This function requires the value type to have an implementation of operator==().
Смотрите также contains() и indexOf().
int QList::count () const
Это перегруженная функция, предоставленная для удобства.
Returns the number of items in the list. This is effectively the same as size().
bool QList::empty () const
Эта функция обеспечивает совместимость с STL. It is equivalent to isEmpty() and returns true if the list is empty.
Returns an STL-style iterator pointing to the imaginary item after the last item in the list.
See also begin() and constEnd().
Это перегруженная функция, предоставленная для удобства.
Removes the item associated with the iterator pos from the list, and returns an iterator to the next item in the list (which may be end()).
See also insert() and removeAt().
Это перегруженная функция, предоставленная для удобства.
Removes all the items from begin up to (but not including) end. Returns an iterator to the same item that end referred to before the call.
T & QList::first ()
Returns a reference to the first item in the list. This function assumes that the list isn't empty.
See also last() and isEmpty().
const T & QList::first () const
Это перегруженная функция, предоставленная для удобства.
QList<T> QList::fromSet ( const QSet<T> & set ) [static]
Returns a QList object with the data contained in set. The order of the elements in the QList is undefined.
Пример:
QSet<double> set;
set << "red" << "green" << "blue" << ... << "black";
QList<double> list = QList<double>::fromSet(set);
qSort(list);
See also fromVector(), toSet(), QSet::toList(), and qSort().
QList<T> QList::fromStdList ( const std::list<T> & list ) [static]
Returns a QList object with the data contained in list. The order of the elements in the QList is the same as in list.
Пример:
std::list<double> stdlist;
list.push_back(1.2);
list.push_back(0.5);
list.push_back(3.14);
QList<double> list = QList<double>::fromStdList(stdlist);
See also toStdList() and QVector::fromStdVector().
QList<T> QList::fromVector ( const QVector<T> & vector ) [static]
Returns a QList object with the data contained in vector.
Пример:
QVector<double> vect;
vect << "red" << "green" << "blue" << "black";
QList<double> list = QVector<T>::fromVector(vect);
list: ["red", "green", "blue", "black"]
See also fromSet(), toVector(), and QVector::toList().
T & QList::front ()
Эта функция обеспечивает совместимость с STL. It is equivalent to first().
const T & QList::front () const
Это перегруженная функция, предоставленная для удобства.
int QList::indexOf ( const T & value, int from = 0 ) const
Returns the index position of the first occurrence of value in the list, searching forward from index position from. Returns -1 if no item matched.
Пример:
QList<QString> list;
list << "A" << "B" << "C" << "B" << "A";
list.indexOf("B"); returns 1
list.indexOf("B", 1); returns 1
list.indexOf("B", 2); returns 3
list.indexOf("X"); returns -1
This function requires the value type to have an implementation of operator==().
Смотрите такжеlastIndexOf() и contains().
void QList::insert ( int i, const T & value )
Inserts value at index position i in the list. If i is 0, the value is prepended to the list. If i is size(), the value is appended to the list.
Пример:
QList<QString> list;
list << "alpha" << "beta" << "delta";
list.insert(2, "gamma");
list: ["alpha", "beta", "gamma", "delta"]
See also append(), prepend(), replace(), and removeAt().
iterator QList::insert ( iterator before, const T & value )
Это перегруженная функция, предоставленная для удобства.
Inserts value in front of the item pointed to by the iterator before. Returns an iterator pointing at the inserted item. Note that the iterator passed to the function will be invalid after the call; the returned iterator should be used instead.
bool QList::isEmpty () const
Возвращает true, если список не содержит элементов; в противном случае возвращается false.
Смотрите также size().
T & QList::last ()
Returns a reference to the last item in the list. This function assumes that the list isn't empty.
See also first() and isEmpty().
const T & QList::last () const
Это перегруженная функция, предоставленная для удобства.
int QList::lastIndexOf ( const T & value, int from = -1 ) const
Returns the index position of the last occurrence of value in the list, searching backward from index position from. If from is -1 (the default), the search starts at the last item. Returns -1 if no item matched.
Пример:
QList<QString> list;
list << "A" << "B" << "C" << "B" << "A";
list.lastIndexOf("B"); returns 3
list.lastIndexOf("B", 3); returns 3
list.lastIndexOf("B", 2); returns 1
list.lastIndexOf("X"); returns -1
This function requires the value type to have an implementation of operator==().
See also indexOf().
QList<T> QList::mid ( int pos, int length = -1 ) const
Returns a list whose elements are copied from this list, starting at position pos. If length is -1 (the default), all elements after pos are copied; otherwise length elements (or all remaining elements if there are less than length elements) are copied.
void QList::move ( int from, int to )
Moves the item at index position from to index position to.
Пример:
QList<QString> list;
list << "A" << "B" << "C" << "D" << "E" << "F";
list.move(1, 4);
list: ["A", "C", "D", "E", "B", "F"]
This is the same as insert(to, takeAt(from)).
See also swap(), insert(), and takeAt().
void QList::pop_back ()
Эта функция обеспечивает совместимость с STL. It is equivalent to removeLast().
void QList::pop_front ()
Эта функция обеспечивает совместимость с STL. It is equivalent to removeFirst().
void QList::prepend ( const T & value )
Inserts value at the beginning of the list.
Пример:
QList<QString> list;
list.prepend("one");
list.prepend("two");
list.prepend("three");
list: ["three", "two", "one"]
This is the same as list.insert(0, value).
This operation is usually very fast (constant time), because QList preallocates extra space on both sides of its internal buffer to allow for fast growth at both ends of the list.
Смотрите также append() и insert().
void QList::push_back ( const T & value )
Эта функция обеспечивает совместимость с STL. It is equivalent to append(value).
void QList::push_front ( const T & value )
Эта функция обеспечивает совместимость с STL. It is equivalent to prepend(value).
int QList::removeAll ( const T & value )
Removes all occurrences of value in the list and returns the number of entries removed.
Пример:
QList<QString> list;
list << "sun" << "cloud" << "sun" << "rain";
list.removeAll("sun");
list: ["cloud", "rain"]
This function requires the value type to have an implementation of operator==().
See also removeAt(), takeAt(), and replace().
void QList::removeAt ( int i )
Removes the item at index position i.
i must be a valid index position in the list (i.e., 0 <= i < size()).
See also takeAt(), removeFirst(), and removeLast().
void QList::removeFirst ()
Removes the first item in the list.
This is the same as removeAt(0).
See also removeAt() and takeFirst().
void QList::removeLast ()
Removes the last item in the list.
This is the same as removeAt(size() - 1).
See also removeAt() and takeLast().
void QList::replace ( int i, const T & value )
Replaces the item at index position i with value.
i must be a valid index position in the list (i.e., 0 <= i < size()).
See also operator[]() and removeAt().
int QList::size () const
Returns the number of items in the list.
See also isEmpty() and count().
void QList::swap ( int i, int j )
Exchange the item at index position i with the item at index position j.
Пример:
QList<QString> list;
list << "A" << "B" << "C" << "D" << "E" << "F";
list.swap(1, 4);
list: ["A", "E", "C", "D", "B", "F"]
See also move().
T QList::takeAt ( int i )
Removes the item at index position i and returns it.
i must be a valid index position in the list (i.e., 0 <= i < size()).
If you don't use the return value, removeAt() is more efficient.
See also removeAt(), takeFirst(), and takeLast().
T QList::takeFirst ()
Removes the first item in the list and returns it.
This is the same as takeAt(0).
This operation is very fast (constant time), because QList preallocates extra space on both sides of its internal buffer to allow for fast growth at both ends of the list.
If you don't use the return value, removeFirst() is more efficient.
See also takeLast(), takeAt(), and removeFirst().
T QList::takeLast ()
Removes the last item in the list and returns it.
This is the same as takeAt(size() - 1).
This operation is very fast (constant time), because QList preallocates extra space on both sides of its internal buffer to allow for fast growth at both ends of the list.
If you don't use the return value, removeLast() is more efficient.
See also takeFirst(), takeAt(), and removeLast().
QSet<T> QList::toSet () const
Returns a QSet object with the data contained in this QList. Since QSet doesn't allow duplicates, the resulting QSet might be smaller than the original list was.
Пример:
QStringList list;
list << "Julia" << "Mike" << "Mike" << "Julia" << "Julia";
QSet<QString> set = list.toSet();
set.contains("Julia"); returns true
set.contains("Mike"); returns true
set.size(); returns 2
See also toVector(), fromSet(), and QSet::fromList().
std::list<T> QList::toStdList () const
Returns a std::list object with the data contained in this QList. Пример:
QList<double> list;
list << 1.2 << 0.5 << 3.14;
std::list<double> stdlist = list.toStdList();
See also fromStdList() and QVector::toStdVector().
QVector<T> QList::toVector () const
Returns a QVector object with the data contained in this QList.
Пример:
QStringList list;
list << "Sven" << "Kim" << "Ola";
QVector<QString> vect = list.toVector();
vect: ["Sven", "Kim", "Ola"]
See also toSet(), fromVector(), and QVector::fromList().
T QList::value ( int i ) const
Returns the value at index position i in the list.
If the index i is out of bounds, the function returns a default-constructed value. If you are certain that the index is going to be within bounds, you can use at() instead, which is slightly faster.
See also at() and operator[]().
T QList::value ( int i, const T & defaultValue ) const
Это перегруженная функция, предоставленная для удобства.
If the index i is out of bounds, the function returns defaultValue.
bool QList::operator!= ( const QList<T> & other ) const
Returns true if other is not equal to this list; otherwise returns false.
Two lists are considered equal if they contain the same values in the same order.
This function requires the value type to have an implementation of operator==().
Смотрите также operator==().
QList<T> QList::operator+ ( const QList<T> & other ) const
Returns a list that contains all the items in this list followed by all the items in the other list.
Смотрите также operator+=().
QList<T> & QList::operator+= ( const QList<T> & other )
Appends the items of the other list to this list and returns a reference to this list.
See also operator+() and append().
QList<T> & QList::operator+= ( const T & value )
Это перегруженная функция, предоставленная для удобства.
Appends value to the list.
See also append() and operator<<().
QList<T> & QList::operator<< ( const QList<T> & other )
Appends the items of the other list to this list and returns a reference to this list.
See also operator+=() and append().
QList<T> & QList::operator<< ( const T & value )
Это перегруженная функция, предоставленная для удобства.
Appends value to the list.
QList<T> & QList::operator= ( const QList<T> & other )
Assigns other to this list and returns a reference to this list.
bool QList::operator== ( const QList<T> & other ) const
Returns true if other is equal to this list; otherwise returns false.
Two lists are considered equal if they contain the same values in the same order.
This function requires the value type to have an implementation of operator==().
Смотрите также operator!=().
T & QList::operator[] ( int i )
Returns the item at index position i as a modifiable reference.
i must be a valid index position in the list (i.e., 0 <= i < size()).
This function is very fast (constant time).
See also at() and value().
const T & QList::operator[] ( int i ) const
Это перегруженная функция, предоставленная для удобства.
Same as at().
Связанные нечлены класса
QDataStream & operator<< ( QDataStream & out, const QList<T> & list )
Writes the list list to stream out.
This function requires the value type to implement operator<<().
Смотрите также Формат операторов QDataStream.
Reads a list from stream in into list.
This function requires the value type to implement operator>>().
Смотрите также Формат операторов QDataStream.
|