Файл примера mainwindow.cppmainwindows/application/mainwindow.cpp/**************************************************************************** ** ** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies). ** Contact: http://www.qt-project.org/legal ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** You may use this file under the terms of the BSD license as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names ** of its contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include <QtGui> #include "mainwindow.h" MainWindow::MainWindow() { textEdit = new QPlainTextEdit; setCentralWidget(textEdit); createActions(); createMenus(); createToolBars(); createStatusBar(); readSettings(); connect(textEdit->document(), SIGNAL(contentsChanged()), this, SLOT(documentWasModified())); setCurrentFile(""); setUnifiedTitleAndToolBarOnMac(true); } void MainWindow::closeEvent(QCloseEvent *event) { if (maybeSave()) { writeSettings(); event->accept(); } else { event->ignore(); } } void MainWindow::newFile() { if (maybeSave()) { textEdit->clear(); setCurrentFile(""); } } void MainWindow::open() { if (maybeSave()) { QString fileName = QFileDialog::getOpenFileName(this); if (!fileName.isEmpty()) loadFile(fileName); } } bool MainWindow::save() { if (curFile.isEmpty()) { return saveAs(); } else { return saveFile(curFile); } } bool MainWindow::saveAs() { QString fileName = QFileDialog::getSaveFileName(this); if (fileName.isEmpty()) return false; return saveFile(fileName); } void MainWindow::about() { QMessageBox::about(this, tr("About Application"), tr("The <b>Application</b> example demonstrates how to " "write modern GUI applications using Qt, with a menu bar, " "toolbars, and a status bar.")); } void MainWindow::documentWasModified() { setWindowModified(textEdit->document()->isModified()); } void MainWindow::createActions() { newAct = new QAction(QIcon(":/images/new.png"), tr("&New"), this); newAct->setShortcuts(QKeySequence::New); newAct->setStatusTip(tr("Create a new file")); connect(newAct, SIGNAL(triggered()), this, SLOT(newFile())); openAct = new QAction(QIcon(":/images/open.png"), tr("&Open..."), this); openAct->setShortcuts(QKeySequence::Open); openAct->setStatusTip(tr("Open an existing file")); connect(openAct, SIGNAL(triggered()), this, SLOT(open())); saveAct = new QAction(QIcon(":/images/save.png"), tr("&Save"), this); saveAct->setShortcuts(QKeySequence::Save); saveAct->setStatusTip(tr("Save the document to disk")); connect(saveAct, SIGNAL(triggered()), this, SLOT(save())); saveAsAct = new QAction(tr("Save &As..."), this); saveAsAct->setShortcuts(QKeySequence::SaveAs); saveAsAct->setStatusTip(tr("Save the document under a new name")); connect(saveAsAct, SIGNAL(triggered()), this, SLOT(saveAs())); exitAct = new QAction(tr("E&xit"), this); exitAct->setShortcuts(QKeySequence::Quit); exitAct->setStatusTip(tr("Exit the application")); connect(exitAct, SIGNAL(triggered()), this, SLOT(close())); cutAct = new QAction(QIcon(":/images/cut.png"), tr("Cu&t"), this); cutAct->setShortcuts(QKeySequence::Cut); cutAct->setStatusTip(tr("Cut the current selection's contents to the " "clipboard")); connect(cutAct, SIGNAL(triggered()), textEdit, SLOT(cut())); copyAct = new QAction(QIcon(":/images/copy.png"), tr("&Copy"), this); copyAct->setShortcuts(QKeySequence::Copy); copyAct->setStatusTip(tr("Copy the current selection's contents to the " "clipboard")); connect(copyAct, SIGNAL(triggered()), textEdit, SLOT(copy())); pasteAct = new QAction(QIcon(":/images/paste.png"), tr("&Paste"), this); pasteAct->setShortcuts(QKeySequence::Paste); pasteAct->setStatusTip(tr("Paste the clipboard's contents into the current " "selection")); connect(pasteAct, SIGNAL(triggered()), textEdit, SLOT(paste())); aboutAct = new QAction(tr("&About"), this); aboutAct->setStatusTip(tr("Show the application's About box")); connect(aboutAct, SIGNAL(triggered()), this, SLOT(about())); aboutQtAct = new QAction(tr("About &Qt"), this); aboutQtAct->setStatusTip(tr("Show the Qt library's About box")); connect(aboutQtAct, SIGNAL(triggered()), qApp, SLOT(aboutQt())); cutAct->setEnabled(false); copyAct->setEnabled(false); connect(textEdit, SIGNAL(copyAvailable(bool)), cutAct, SLOT(setEnabled(bool))); connect(textEdit, SIGNAL(copyAvailable(bool)), copyAct, SLOT(setEnabled(bool))); } void MainWindow::createMenus() { fileMenu = menuBar()->addMenu(tr("&File")); fileMenu->addAction(newAct); fileMenu->addAction(openAct); fileMenu->addAction(saveAct); fileMenu->addAction(saveAsAct); fileMenu->addSeparator(); fileMenu->addAction(exitAct); editMenu = menuBar()->addMenu(tr("&Edit")); editMenu->addAction(cutAct); editMenu->addAction(copyAct); editMenu->addAction(pasteAct); menuBar()->addSeparator(); helpMenu = menuBar()->addMenu(tr("&Help")); helpMenu->addAction(aboutAct); helpMenu->addAction(aboutQtAct); } void MainWindow::createToolBars() { fileToolBar = addToolBar(tr("File")); fileToolBar->addAction(newAct); fileToolBar->addAction(openAct); fileToolBar->addAction(saveAct); editToolBar = addToolBar(tr("Edit")); editToolBar->addAction(cutAct); editToolBar->addAction(copyAct); editToolBar->addAction(pasteAct); } void MainWindow::createStatusBar() { statusBar()->showMessage(tr("Ready")); } void MainWindow::readSettings() { QSettings settings("Trolltech", "Application Example"); QPoint pos = settings.value("pos", QPoint(200, 200)).toPoint(); QSize size = settings.value("size", QSize(400, 400)).toSize(); resize(size); move(pos); } void MainWindow::writeSettings() { QSettings settings("Trolltech", "Application Example"); settings.setValue("pos", pos()); settings.setValue("size", size()); } bool MainWindow::maybeSave() { if (textEdit->document()->isModified()) { QMessageBox::StandardButton ret; ret = QMessageBox::warning(this, tr("Application"), tr("The document has been modified.\n" "Do you want to save your changes?"), QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel); if (ret == QMessageBox::Save) return save(); else if (ret == QMessageBox::Cancel) return false; } return true; } void MainWindow::loadFile(const QString &fileName) { QFile file(fileName); if (!file.open(QFile::ReadOnly | QFile::Text)) { QMessageBox::warning(this, tr("Application"), tr("Cannot read file %1:\n%2.") .arg(fileName) .arg(file.errorString())); return; } QTextStream in(&file); #ifndef QT_NO_CURSOR QApplication::setOverrideCursor(Qt::WaitCursor); #endif textEdit->setPlainText(in.readAll()); #ifndef QT_NO_CURSOR QApplication::restoreOverrideCursor(); #endif setCurrentFile(fileName); statusBar()->showMessage(tr("File loaded"), 2000); } bool MainWindow::saveFile(const QString &fileName) { QFile file(fileName); if (!file.open(QFile::WriteOnly | QFile::Text)) { QMessageBox::warning(this, tr("Application"), tr("Cannot write file %1:\n%2.") .arg(fileName) .arg(file.errorString())); return false; } QTextStream out(&file); #ifndef QT_NO_CURSOR QApplication::setOverrideCursor(Qt::WaitCursor); #endif out << textEdit->toPlainText(); #ifndef QT_NO_CURSOR QApplication::restoreOverrideCursor(); #endif setCurrentFile(fileName); statusBar()->showMessage(tr("File saved"), 2000); return true; } void MainWindow::setCurrentFile(const QString &fileName) { curFile = fileName; textEdit->document()->setModified(false); setWindowModified(false); QString shownName = curFile; if (curFile.isEmpty()) shownName = "untitled.txt"; setWindowFilePath(shownName); } QString MainWindow::strippedName(const QString &fullFileName) { return QFileInfo(fullFileName).fileName(); } |
Попытка перевода Qt документации. Если есть желание присоединиться, или если есть замечания или пожелания, то заходите на форум: Перевод Qt документации на русский язык... Люди внесшие вклад в перевод: Команда переводчиков |