QSortFilterProxyModel Class ReferenceThe QSortFilterProxyModel class provides support for sorting and filtering data passed between another model and a view. Далее... #include <QSortFilterProxyModel> Inherits: QAbstractProxyModel. This class was introduced in Qt 4.1. Свойства
Открытые функции
Переопределённые открытые функции
Открытые слоты
Защищенные функции
Дополнительные унаследованные члены
Подробное описаниеThe QSortFilterProxyModel class provides support for sorting and filtering data passed between another model and a view. QSortFilterProxyModel can be used for sorting items, filtering out items, or both. The model transforms the structure of a source model by mapping the model indexes it supplies to new indexes, corresponding to different locations, for views to use. This approach allows a given source model to be restructured as far as views are concerned without requiring any transformations on the underlying data, and without duplicating the data in memory. Let's assume that we want to sort and filter the items provided by a custom model. The code to set up the model and the view, without sorting and filtering, would look like this: QTreeView *treeView = new QTreeView; MyItemModel *model = new MyItemModel(this); treeView->setModel(model); To add sorting and filtering support to MyItemModel, we need to create a QSortFilterProxyModel, call setSourceModel() with the MyItemModel as argument, and install the QSortFilterProxyModel on the view: QTreeView *treeView = new QTreeView; MyItemModel *sourceModel = new MyItemModel(this); QSortFilterProxyModel *proxyModel = new QSortFilterProxyModel(this); proxyModel->setSourceModel(sourceModel); treeView->setModel(proxyModel); At this point, neither sorting nor filtering is enabled; the original data is displayed in the view. Any changes made through the QSortFilterProxyModel are applied to the original model. The QSortFilterProxyModel acts as a wrapper for the original model. If you need to convert source QModelIndexes to sorted/filtered model indexes or vice versa, use mapToSource(), mapFromSource(), mapSelectionToSource(), and mapSelectionFromSource(). Note: By default, the model does not dynamically re-sort and re-filter data whenever the original model changes. This behavior can be changed by setting the dynamicSortFilter property. The Basic Sort/Filter Model and Custom Sort/Filter Model examples illustrate how to use QSortFilterProxyModel to perform basic sorting and filtering and how to subclass it to implement custom behavior. СортировкаQTableView and QTreeView have a sortingEnabled property that controls whether the user can sort the view by clicking the view's horizontal header. Например: treeView->setSortingEnabled(true); When this feature is on (the default is off), clicking on a header section sorts the items according to that column. By clicking repeatedly, the user can alternate between ascending and descending order. Behind the scene, the view calls the sort() virtual function on the model to reorder the data in the model. To make your data sortable, you can either implement sort() in your model, or use a QSortFilterProxyModel to wrap your model -- QSortFilterProxyModel provides a generic sort() reimplementation that operates on the sortRole() (Qt::DisplayRole by default) of the items and that understands several data types, including int, QString, and QDateTime. For hierarchical models, sorting is applied recursively to all child items. String comparisons are case sensitive by default; this can be changed by setting the sortCaseSensitivity property. Custom sorting behavior is achieved by subclassing QSortFilterProxyModel and reimplementing lessThan(), which is used to compare items. Например: bool MySortFilterProxyModel::lessThan(const QModelIndex &left, const QModelIndex &right) const { QVariant leftData = sourceModel()->data(left); QVariant rightData = sourceModel()->data(right); if (leftData.type() == QVariant::DateTime) { return leftData.toDateTime() < rightData.toDateTime(); } else { QRegExp *emailPattern = new QRegExp("([\\w\\.]*@[\\w\\.]*)"); QString leftString = leftData.toString(); if(left.column() == 1 && emailPattern->indexIn(leftString) != -1) leftString = emailPattern->cap(1); QString rightString = rightData.toString(); if(right.column() == 1 && emailPattern->indexIn(rightString) != -1) rightString = emailPattern->cap(1); return QString::localeAwareCompare(leftString, rightString) < 0; } } (This code snippet comes from the Custom Sort/Filter Model example.) An alternative approach to sorting is to disable sorting on the view and to impose a certain order to the user. This is done by explicitly calling sort() with the desired column and order as arguments on the QSortFilterProxyModel (or on the original model if it implements sort()). Например: proxyModel->sort(2, Qt::AscendingOrder); QSortFilterProxyModel can be sorted by column -1, in which case it returns to the sort order of the underlying source model. FilteringIn addition to sorting, QSortFilterProxyModel can be used to hide items that do not match a certain filter. The filter is specified using a QRegExp object and is applied to the filterRole() (Qt::DisplayRole by default) of each item, for a given column. The QRegExp object can be used to match a regular expression, a wildcard pattern, or a fixed string. Например: proxyModel->setFilterRegExp(QRegExp(".png", Qt::CaseInsensitive, QRegExp::FixedString)); proxyModel->setFilterKeyColumn(1); For hierarchical models, the filter is applied recursively to all children. If a parent item doesn't match the filter, none of its children will be shown. A common use case is to let the user specify the filter regexp, wildcard pattern, or fixed string in a QLineEdit and to connect the textChanged() signal to setFilterRegExp(), setFilterWildcard(), or setFilterFixedString() to reapply the filter. Custom filtering behavior can be achieved by reimplementing the filterAcceptsRow() and filterAcceptsColumn() functions. For example (from the Custom Sort/Filter Model example), the following implementation ignores the filterKeyColumn property and performs filtering on columns 0, 1, and 2: bool MySortFilterProxyModel::filterAcceptsRow(int sourceRow, const QModelIndex &sourceParent) const { QModelIndex index0 = sourceModel()->index(sourceRow, 0, sourceParent); QModelIndex index1 = sourceModel()->index(sourceRow, 1, sourceParent); QModelIndex index2 = sourceModel()->index(sourceRow, 2, sourceParent); return (sourceModel()->data(index0).toString().contains(filterRegExp()) || sourceModel()->data(index1).toString().contains(filterRegExp())) && dateInRange(sourceModel()->data(index2).toDate()); } (This code snippet comes from the Custom Sort/Filter Model example.) If you are working with large amounts of filtering and have to invoke invalidateFilter() repeatedly, using reset() may be more efficient, depending on the implementation of your model. However, reset() returns the proxy model to its original state, losing selection information, and will cause the proxy model to be repopulated. НаследованиеSince QAbstractProxyModel and its subclasses are derived from QAbstractItemModel, much of the same advice about subclassing normal models also applies to proxy models. In addition, it is worth noting that many of the default implementations of functions in this class are written so that they call the equivalent functions in the relevant source model. This simple proxying mechanism may need to be overridden for source models with more complex behavior; for example, if the source model provides a custom hasChildren() implementation, you should also provide one in the proxy model. Note: Some general guidelines for subclassing models are available in the Model Subclassing Reference. See also QAbstractProxyModel, QAbstractItemModel, Model/View Programming, Basic Sort/Filter Model Example, Custom Sort/Filter Model Example, and QIdentityProxyModel. Описание свойствdynamicSortFilter : boolThis property holds whether the proxy model is dynamically sorted and filtered whenever the contents of the source model change. Note that you should not update the source model through the proxy model when dynamicSortFilter is true. For instance, if you set the proxy model on a QComboBox, then using functions that update the model, e.g., addItem(), will not work as expected. An alternative is to set dynamicSortFilter to false and call sort() after adding items to the QComboBox. Значение по умолчанию равно false. Это свойство было введено в Qt 4.2. Функции доступа:
filterCaseSensitivity : Qt::CaseSensitivityThis property holds the case sensitivity of the QRegExp pattern used to filter the contents of the source model. By default, the filter is case sensitive. Функции доступа:
See also filterRegExp and sortCaseSensitivity. filterKeyColumn : intThis property holds the column where the key used to filter the contents of the source model is read from. Значение по умолчанию равно 0. If the value is -1, the keys will be read from all columns. Функции доступа:
filterRegExp : QRegExpThis property holds the QRegExp used to filter the contents of the source model. Setting this property overwrites the current filterCaseSensitivity. By default, the QRegExp is an empty string matching all contents. If no QRegExp or an empty string is set, everything in the source model will be accepted. Функции доступа:
See also filterCaseSensitivity, setFilterWildcard(), and setFilterFixedString(). filterRole : intThis property holds the item role that is used to query the source model's data when filtering items. The default value is Qt::DisplayRole. Это свойство было введено в Qt 4.2. Функции доступа:
See also filterAcceptsRow(). isSortLocaleAware : boolThis property holds the local aware setting used for comparing strings when sorting. By default, sorting is not local aware. Это свойство было введено в Qt 4.3. Функции доступа:
See also sortCaseSensitivity and lessThan(). sortCaseSensitivity : Qt::CaseSensitivityThis property holds the case sensitivity setting used for comparing strings when sorting. By default, sorting is case sensitive. Это свойство было введено в Qt 4.2. Функции доступа:
See also filterCaseSensitivity and lessThan(). sortRole : intThis property holds the item role that is used to query the source model's data when sorting items. The default value is Qt::DisplayRole. Это свойство было введено в Qt 4.2. Функции доступа:
See also lessThan(). Описание функций-членовQSortFilterProxyModel::QSortFilterProxyModel ( QObject * parent = 0 )Constructs a sorting filter model with the given parent. QSortFilterProxyModel::~QSortFilterProxyModel ()Destroys this sorting filter model. QModelIndex QSortFilterProxyModel::buddy ( const QModelIndex & index ) const [virtual]Reimplemented from QAbstractItemModel::buddy(). bool QSortFilterProxyModel::canFetchMore ( const QModelIndex & parent ) const [virtual]Reimplemented from QAbstractItemModel::canFetchMore(). int QSortFilterProxyModel::columnCount ( const QModelIndex & parent = QModelIndex() ) const [virtual]Reimplemented from QAbstractItemModel::columnCount(). QVariant QSortFilterProxyModel::data ( const QModelIndex & index, int role = Qt::DisplayRole ) const [virtual]Переопределено из QAbstractItemModel::data(). Смотрите также setData(). bool QSortFilterProxyModel::dropMimeData ( const QMimeData * data, Qt::DropAction action, int row, int column, const QModelIndex & parent ) [virtual]Reimplemented from QAbstractItemModel::dropMimeData(). void QSortFilterProxyModel::fetchMore ( const QModelIndex & parent ) [virtual]Reimplemented from QAbstractItemModel::fetchMore(). bool QSortFilterProxyModel::filterAcceptsColumn ( int source_column, const QModelIndex & source_parent ) const [virtual protected]Returns true if the item in the column indicated by the given source_column and source_parent should be included in the model; otherwise returns false. The default implementation returns true if the value held by the relevant item matches the filter string, wildcard string or regular expression. Note: By default, the Qt::DisplayRole is used to determine if the row should be accepted or not. This can be changed by setting the filterRole property. See also filterAcceptsRow(), setFilterFixedString(), setFilterRegExp(), and setFilterWildcard(). bool QSortFilterProxyModel::filterAcceptsRow ( int source_row, const QModelIndex & source_parent ) const [virtual protected]Returns true if the item in the row indicated by the given source_row and source_parent should be included in the model; otherwise returns false. The default implementation returns true if the value held by the relevant item matches the filter string, wildcard string or regular expression. Note: By default, the Qt::DisplayRole is used to determine if the row should be accepted or not. This can be changed by setting the filterRole property. See also filterAcceptsColumn(), setFilterFixedString(), setFilterRegExp(), and setFilterWildcard(). Qt::ItemFlags QSortFilterProxyModel::flags ( const QModelIndex & index ) const [virtual]Переопределено из QAbstractItemModel::flags(). bool QSortFilterProxyModel::hasChildren ( const QModelIndex & parent = QModelIndex() ) const [virtual]Reimplemented from QAbstractItemModel::hasChildren(). QVariant QSortFilterProxyModel::headerData ( int section, Qt::Orientation orientation, int role = Qt::DisplayRole ) const [virtual]Переопределено из QAbstractItemModel::headerData(). See also setHeaderData(). QModelIndex QSortFilterProxyModel::index ( int row, int column, const QModelIndex & parent = QModelIndex() ) const [virtual]Reimplemented from QAbstractItemModel::index(). bool QSortFilterProxyModel::insertColumns ( int column, int count, const QModelIndex & parent = QModelIndex() ) [virtual]Reimplemented from QAbstractItemModel::insertColumns(). bool QSortFilterProxyModel::insertRows ( int row, int count, const QModelIndex & parent = QModelIndex() ) [virtual]Переопределено из QAbstractItemModel::insertRows(). void QSortFilterProxyModel::invalidate () [slot]Invalidates the current sorting and filtering. Эта функция была введена в Qt 4.3. See also invalidateFilter(). void QSortFilterProxyModel::invalidateFilter () [protected]Invalidates the current filtering. This function should be called if you are implementing custom filtering (e.g. filterAcceptsRow()), and your filter parameters have changed. Эта функция была введена в Qt 4.3. Смотрите также invalidate(). bool QSortFilterProxyModel::lessThan ( const QModelIndex & left, const QModelIndex & right ) const [virtual protected]Returns true if the value of the item referred to by the given index left is less than the value of the item referred to by the given index right, otherwise returns false. This function is used as the < operator when sorting, and handles the following QVariant types:
Any other type will be converted to a QString using QVariant::toString(). Comparison of QStrings is case sensitive by default; this can be changed using the sortCaseSensitivity property. By default, the Qt::DisplayRole associated with the QModelIndexes is used for comparisons. This can be changed by setting the sortRole property. Note: The indices passed in correspond to the source model. See also sortRole, sortCaseSensitivity, and dynamicSortFilter. QModelIndex QSortFilterProxyModel::mapFromSource ( const QModelIndex & sourceIndex ) const [virtual]Reimplemented from QAbstractProxyModel::mapFromSource(). Returns the model index in the QSortFilterProxyModel given the sourceIndex from the source model. See also mapToSource(). QItemSelection QSortFilterProxyModel::mapSelectionFromSource ( const QItemSelection & sourceSelection ) const [virtual]Reimplemented from QAbstractProxyModel::mapSelectionFromSource(). QItemSelection QSortFilterProxyModel::mapSelectionToSource ( const QItemSelection & proxySelection ) const [virtual]Reimplemented from QAbstractProxyModel::mapSelectionToSource(). QModelIndex QSortFilterProxyModel::mapToSource ( const QModelIndex & proxyIndex ) const [virtual]Reimplemented from QAbstractProxyModel::mapToSource(). Returns the source model index corresponding to the given proxyIndex from the sorting filter model. See also mapFromSource(). QModelIndexList QSortFilterProxyModel::match ( const QModelIndex & start, int role, const QVariant & value, int hits = 1, Qt::MatchFlags flags = Qt::MatchFlags( Qt::MatchStartsWith | Qt::MatchWrap ) ) const [virtual]Reimplemented from QAbstractItemModel::match(). QMimeData * QSortFilterProxyModel::mimeData ( const QModelIndexList & indexes ) const [virtual]Reimplemented from QAbstractItemModel::mimeData(). QStringList QSortFilterProxyModel::mimeTypes () const [virtual]Reimplemented from QAbstractItemModel::mimeTypes(). QModelIndex QSortFilterProxyModel::parent ( const QModelIndex & child ) const [virtual]Reimplemented from QAbstractItemModel::parent(). bool QSortFilterProxyModel::removeColumns ( int column, int count, const QModelIndex & parent = QModelIndex() ) [virtual]Переопределено из QAbstractItemModel::removeColumns(). bool QSortFilterProxyModel::removeRows ( int row, int count, const QModelIndex & parent = QModelIndex() ) [virtual]Переопределено из QAbstractItemModel::removeRows(). int QSortFilterProxyModel::rowCount ( const QModelIndex & parent = QModelIndex() ) const [virtual]Переопределено из QAbstractItemModel::rowCount(). bool QSortFilterProxyModel::setData ( const QModelIndex & index, const QVariant & value, int role = Qt::EditRole ) [virtual]Переопределено из QAbstractItemModel::setData(). Смотрите также data(). void QSortFilterProxyModel::setFilterFixedString ( const QString & pattern ) [slot]Sets the fixed string used to filter the contents of the source model to the given pattern. See also setFilterCaseSensitivity(), setFilterRegExp(), setFilterWildcard(), and filterRegExp(). void QSortFilterProxyModel::setFilterWildcard ( const QString & pattern ) [slot]Sets the wildcard expression used to filter the contents of the source model to the given pattern. See also setFilterCaseSensitivity(), setFilterRegExp(), setFilterFixedString(), and filterRegExp(). bool QSortFilterProxyModel::setHeaderData ( int section, Qt::Orientation orientation, const QVariant & value, int role = Qt::EditRole ) [virtual]Переопределена из QAbstractItemModel::setHeaderData(). See also headerData(). void QSortFilterProxyModel::setSourceModel ( QAbstractItemModel * sourceModel ) [virtual]Reimplemented from QAbstractProxyModel::setSourceModel(). void QSortFilterProxyModel::sort ( int column, Qt::SortOrder order = Qt::AscendingOrder ) [virtual]Переопределено из QAbstractItemModel::sort(). int QSortFilterProxyModel::sortColumn () constthe column currently used for sorting This returns the most recently used sort column. Эта функция была введена в Qt 4.5. Qt::SortOrder QSortFilterProxyModel::sortOrder () constthe order currently used for sorting This returns the most recently used sort order. Эта функция была введена в Qt 4.5. QSize QSortFilterProxyModel::span ( const QModelIndex & index ) const [virtual]Reimplemented from QAbstractItemModel::span(). Qt::DropActions QSortFilterProxyModel::supportedDropActions () const [virtual]Reimplemented from QAbstractItemModel::supportedDropActions(). |
Попытка перевода Qt документации. Если есть желание присоединиться, или если есть замечания или пожелания, то заходите на форум: Перевод Qt документации на русский язык... Люди внесшие вклад в перевод: Команда переводчиков |